USB to CAN Bus

If you’re an engineer and involved in vehicle design, industrial automation, or other micro-chip related industry, we have an adapter for you. The 1 port CAN Bus adapter does not need external power running from the computer’s USB port. It has an onboard firmware update utility and other features that can help in your design.

The Serial RS-232 CAN Bus adapter connects to your computer’s DB-9 serial port to create the CAN Bus protocol. It includes a 12V power adapter that can be plugged into the wall for power and is mountable to flat surfaces.

If you’re using CAN Bus, this USB to CAN Bus adapter is for you. Built small for single port operations, this CAN Bus adapter employs galvanic isolation to catch stay signal noise produced by current. Operates with a DB9 and USB Type-B connector, no additional power source is needed.

This USB to Controller Area Network device (CAN) adapter installs and is automatically recognized by your operating system. It has +/- 16kV ESD protection for all signals and supports CAN 2.0A and CAN 2.0B. No external power is needed to run your CAN applications as the device runs from USB bus power.

The USB-2CAN-M provides a cost-effective solution for customers to enable communication with CAN bus devices. The solution designed using an ARM Cortex-M0 32-bit micro controller and the USB to serial chip makes it very flexible in handling small burst of CAN frames at a high speed.

The USB-2CAN-SI-M provides a cost-effective solution for customers to enable communication with CAN bus devices. The solution designed with an integrated ARM Cortex-M0 32-bit micro controller and the USB to serial chip makes it very flexible in handling small burst of CAN frames at a high speed.

The NCAN-2 is designed to make a fast, simple way to communicate with CAN bus devices. The NCAN-2 adds two industrial CAN bus channel to your host system with a transparent virtual serial port without limitations on operating systems and distances.

• Adds two virtual CAN port via network connection
• Supports network protocols such as TCP and UDP client/server
• CAN bus speed up to 1Mbits
• Provides DC +5V 100mA power for external devices

The NCAN-1 is designed to make a fast, simple way to communicate with CAN bus devices. The NCAN-1 adds one industrial CAN bus channel to your host system with a transparent virtual serial port without limitations on operating systems and distances.

• Adds one virtual CAN port via network connection
• Supports network protocols such as TCP and UDP client/server
• CAN bus speed up to 1Mbits
• Provides DC +5V 100mA power for external devices